How To Fix Gap Between Light Fixture And Ceiling

How to Fix Gap Between Light Fixture and Ceiling

A gap between a light fixture and the ceiling can be an eyesore, allowing dust and insects to accumulate. It can also be a safety hazard, as the fixture can become loose and fall. Fortunately, there are a few easy steps you can take to fill the gap and restore your light fixture to its original condition.

There are two main types of light fixtures: recessed and surface-mounted. Recessed fixtures are installed in a hole in the ceiling, while surface-mounted fixtures are attached to the ceiling's surface. The method for filling the gap will vary depending on the type of fixture you have.

Filling the Gap in a Recessed Light Fixture

To fill the gap in a recessed light fixture, you will need a can light adapter. This is a small, round piece of metal that fits over the edge of the fixture and extends it to the ceiling. Can light adapters are available at most hardware stores.

1. Turn off the power to the light fixture at the circuit breaker.
2. Remove the light bulb from the fixture.
3. Loosen the screws that hold the fixture in place and carefully pull it down from the ceiling.
4. Place the can light adapter over the edge of the fixture and tighten the screws to secure it.
5. Push the fixture back into the hole in the ceiling and tighten the screws to secure it.
6. Install the light bulb and turn on the power to the fixture.

Filling the Gap in a Surface-Mounted Light Fixture

To fill the gap in a surface-mounted light fixture, you will need a light fixture gasket. This is a thin, rubbery piece that fits between the fixture and the ceiling. Light fixture gaskets are available at most hardware stores.

1. Turn off the power to the light fixture at the circuit breaker.
2. Remove the light bulb from the fixture.
3. Loosen the screws that hold the fixture in place and carefully remove it from the ceiling.
4. Place the light fixture gasket between the fixture and the ceiling.
5. Reattach the fixture to the ceiling and tighten the screws to secure it.
6. Install the light bulb and turn on the power to the fixture.

Just Installed A New Light Fixture Over My Dining Room Table And There S Gap Between The Ceiling Top Flush Piece What Best Way To Fix This R Fixit

How Do I Cover This Gap In A Ceiling Light Fixture Without Having To Take It Down Anyway Hide R Howto

Help Put A New Pendant Lamp And There Is An Ugly Gap In The Ceiling Now Because Old Was Bigger How Can I Fix This R Fixit

How To Install A Ceiling Medallion

Keeping The Heat In Section 5 Roofs And Attics

1 2 In Gap Between Fan And Ceiling

Ideas For Gap At Ceiling R Tile

How To Fix Gap Between Two Drywall Ceiling

6 Can Lights In Old 7 Holes How To Fix Gap

How To Seal Recessed Light Fixtures For Energy Efficiency Today S Homeowner