How To Install Recessed Lighting Existing Ceiling

How to Install Recessed Lighting in an Existing Ceiling

Recessed lighting is a great way to add style and functionality to any room. It can be used to create ambient lighting, task lighting, or accent lighting. If you're thinking about installing recessed lighting in your home, there are a few things you need to know.

In this article, we'll walk you through the steps of how to install recessed lighting in an existing ceiling. We'll cover everything from choosing the right lights to cutting the holes to wiring the fixtures.

Step 1: Choose the Right Lights

The first step is to choose the right recessed lights for your needs. There are a few things to consider when making your choice, including the size of the room, the type of ceiling, and the amount of light you need.

For most rooms, 6-inch recessed lights are a good choice. They provide a good amount of light without being too overwhelming. However, if you have a large room or a high ceiling, you may want to consider using 8-inch or 10-inch lights.

If you have a textured ceiling, you'll need to choose lights that are designed for that type of ceiling. These lights have a special trim that will help to hide the gap between the light and the ceiling.

Finally, consider how much light you need. If you're using recessed lights as ambient lighting, you'll need to choose lights that produce a lot of light. If you're using them as task lighting, you can choose lights that produce less light.

Step 2: Cut the Holes

Once you've chosen your lights, it's time to cut the holes in the ceiling. To do this, you'll need a hole saw and a drill.

Before you start cutting, make sure to mark the locations of the lights on the ceiling. You can do this by using a chalk line or a laser level.

Once you've marked the locations, use a hole saw to cut the holes. The hole saw should be the same size as the trim on the lights.

Step 3: Wire the Fixtures

Once the holes are cut, it's time to wire the fixtures. To do this, you'll need to connect the black wire from the fixture to the black wire from the electrical box. Connect the white wire from the fixture to the white wire from the electrical box. And connect the ground wire from the fixture to the ground wire from the electrical box.

Once the fixtures are wired, push them into the holes in the ceiling. Make sure that the trim is flush with the ceiling.